TTORA Forum banner

1 - 20 of 26 Posts

·
Registered
Joined
·
739 Posts
Discussion Starter #1 (Edited)
going in trash soon!
would like to sell or trade for spare rear axle,or driveshaft parts
all off of 99 taco non trd w/manual hubs
i have:
a stock front diff 4.10 gears $75 no hubs or cv's

aarms $30
rear drum brake parts no backing plates,3x drums and insides in good shape $50
rear brake hard lines $20 runs across top of rear axle
lower front valance with stock lights $40
both stock skid plates $50 set up for diff drop
may have some other stuff i can't remember,let me know if you are looking for something and i'll see if i have it
make me an offer i can't refuse and it's yours!:D
parts in aspen,co
i also have a glasstite raven topper with all extras including 2 dome lights,carpeted interior,flip down front window,and flip up side windows,this fits an xtra cab taco and was originally$1400,will take $750 with thule rack with accessories,bike rack,canoe rack,quick tie downs,$650 with out the rack,it can be painted for a couple hundy to match,i have pics if you email me
[email protected] :eek:
 

·
Registered
Joined
·
23 Posts
hey man where are you located?
 

·
Registered
Joined
·
51 Posts
Are these parts you have left over from doing a SAS? If so, I really could use the cam bolts (bolts that hold the lower arms in) I have a stripped one and my alignment shop wont align it til i get it fixed. Thanks

-Dan
 

·
Registered
Joined
·
739 Posts
Discussion Starter #7
not real sure if i have them or not,is that the long gold or maybe silver anodized bolts with the adjusters on them? if it is i don't think i have them,i'll have to dig into that stuff later this week and see what i have left
 

·
Registered
Joined
·
464 Posts
Guapotaco said:
would like to sell or trade for spare rear axle,or driveshaft parts
all off of 99 taco non trd
i have:
a stock front diff 4.10 gears $75 no hubs or cv's
steering rack with poly only 65,000 miles and no wheeling $150
aarms $30
rear drum brake parts no backing plates,$20
rear brake hard lines$20
lower front valance with stock lights$40
both stock skid plates $50
may some other stuff i can't remember,let me know if you are looking for something and i'll see if i have it
make me an oiffer i can't refuse and it's yours!:D
parts in aspen,co
i also have a glasstite raven topper with all extras including 2 dome lights,carpeted interior,flip down front window,and flip up side windows,this fits an xtra cab taco and was originally$1400,will take $750 with thule rack with accessories,bike rack,canoe rack,quick tie downs,$650 with out the rack,it can be painted for a couple hundy to match,i have pics if you email me
[email protected] :eek:
Would you be willing to ship the front Diff? I am located in Missoula Montana. Any idea how much it costs to ship a front diff. $50 $100?
 

·
Registered
Joined
·
739 Posts
Discussion Starter #9
not sure really,i sent a toy 3rd awhile back and it cost $75 so the diff would be almost twice that i would think,let me know if you want it and i can check some shipping prices for you,give me your zip and i'll see what i can do
 

·
Registered
Joined
·
2,469 Posts
Guapotaco said:
would like to sell or trade for spare rear axle,or driveshaft parts
all off of 99 taco non trd
i have:
a stock front diff 4.10 gears $75 no hubs or cv's
steering rack with poly only 65,000 miles and no wheeling $150
aarms $30
rear drum brake parts no backing plates,$20
rear brake hard lines$20
lower front valance with stock lights$40
both stock skid plates $50
may some other stuff i can't remember,let me know if you are looking for something and i'll see if i have it
make me an oiffer i can't refuse and it's yours!:D
parts in aspen,co
i also have a glasstite raven topper with all extras including 2 dome lights,carpeted interior,flip down front window,and flip up side windows,this fits an xtra cab taco and was originally$1400,will take $750 with thule rack with accessories,bike rack,canoe rack,quick tie downs,$650 with out the rack,it can be painted for a couple hundy to match,i have pics if you email me
[email protected] :eek:
Put me in line for that front diff too please. Does it have the complete actuator assembly on it?
 

·
Registered
Joined
·
739 Posts
Discussion Starter #14
heh i haven't heard back about the diff, you want it? this is a non add diff,if thats what you meant by actuator?
 

·
Registered
Joined
·
2,469 Posts
Guapotaco said:
heh i haven't heard back about the diff, you want it? this is a non add diff,if thats what you meant by actuator?

Well, I have a ADD one, so if yours is not ADD then it may not work for me.
Can you send me a pic of the diff assy. so I can compare the part I need to the one on yours? If I find that the actuator WILL work I am willing to buy the entire diff from you. BTW, I'm talking about the part where the electrical connector and vaccum line connect on the rear facing side of the diff.

My email is [email protected]

Thanks!
 

·
Registered
Joined
·
739 Posts
Discussion Starter #16
i'll have to get some pics next week,i'm outta town for the next few days, and super busy next week doing a special event here at work,i 'll try to get them but it may take me a week or so :)
 

·
Registered
Joined
·
192 Posts
Did the diff come off a manual hub truck? If so I'd trade you the rear portion of a driveshaft for it. (the shorter half, if that's what your looking for)
 

·
Registered
Joined
·
739 Posts
Discussion Starter #19 (Edited)
heh,do you mean the shaft behind the carrier bearing,with a slip joint in it? or the whole thing including the short shaft? how many miles on it? I'm gonna get some pics to dude right above you, and see if he's still interested this week, and then we can talk,and yes it came off a manual hub front end :D
 
1 - 20 of 26 Posts
Top