TTORA Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1 (Edited)
Tacoma SAS stuff...PARTING OUT NOW

I was going to do a sas on my 98 4runner in college. I graduated and don't have the time or desire any longer. Would like to sell all for $2000 in the off chance someone is planning this swap in the area. NOW PARTING OUT! Will sell for $2000 even OBO for the first person who wants it all. This took a while to collect, but you can get it all at once. You pay shipping.

email at [email protected]
I am in bellevue, WA.


FRONT Cost
Axle Dana 44 86 Wagoneer $280.00

*Wheel bearing/seal Complete Offroad $100.00

*Spindle bearing/seal Complete Offroad $20.00

*Inner axle seals Complete Offroad $20.00

Sierra 4.89 Complete Offroad $130.00

Timken install kit Complete Offroad $74.00

Open carrier 3.93 and up $70.09

*Brake calipers NAPA | $300
*Brake rotors NAPA |
Dorman wheel stud PN 610-264 NAPA |
Ball Joints NAPA |

*IFS box w/ Pitman Fox Fab $110.00

*2 IFS steering shafts Online $20

*Arms + Hardware Poly Performance $260

*Knuckles Online $90

*Spindle studs & nuts Parts mike $15

*Knuckle mill & tap Sky $45

*Spring perches Shakerbuilt $19.00

*U-bolt flip kit Marlin $60.32

*Leaf springs Marlin 4 inch USA $299.48

Hubs Warn Premium #20990 $72.94

Hub conversion kit Warn #32720 $24.49

2wd T-100 Oil Pan 12101-65030 | $195.07
Plate (windage tray) 12122-62040 |
Strainer (pickup) 15104-62060 |
Gasket (pickup) 15147-62020 |
Dipstick 15301-62060 |
Dipstick Guide Tube 11452-62060 |
Guide Tube Union 90405-10033 |

*Steering lines ifs box conv. Bent-Up $50

*Stainless Brake lines Front Range | $113

*Pitman insert Front Range

* = PENDING

I have everything to complete the front axle listed with new rotors/bearings/calipers/seals/4.88 gears/install kit/warn hubs/wheel studs/ball joints. Marlin USA made 4" front leafs. Replacement oil pan for the front and all parts needed. knuckles are tapped, sky tall steering arms. I have cut all the unnecessary brackets from the axle houseing and have began grinding the inner knuckles to rotate them. One side is free, the other needs a little more grinding. Everything bought in 2006 and has been stored in my house since.
 

·
Registered
Joined
·
787 Posts
I would be interested in a few of the things too. Just don't need the axle housing
 

·
Registered
Joined
·
28 Posts
Discussion Starter #6
How about you guys PM me what you want and ill see if it matches up. Im just trying to get rid of all this and dont want to be left over with lots of stuff. Ill let you know. Ohh yeah, and the twin stick is still up for sale too. I am in Bellevue/Seattle WA area, as listed.
 
1 - 10 of 10 Posts
Top