[x0ffr0adtac0x]

well i kinda have an idea where to put these, but i need stepbystep instructions and i have searched info about them but nothing. any of you have any ideas or help??

http://chaosfab.com/toyaccess.html

they are the first to the top
thanx guys
david

 

[dcpunk123]

well i kinda have an idea where to put these, but i need stepbystep instructions and i have searched info about them but nothing. any of you have any ideas or help??

http://chaosfab.com/toyaccess.html

they are the first to the top
thanx guys
david

here is a pretty good write up
http://www.keystonekrawlers.com/Mods/Toyota/SteerBushing/TacomaSteeringBush.htm

 

[hytenor]

well i kinda have an idea where to put these, but i need stepbystep instructions and i have searched info about them but nothing. any of you have any ideas or help??

http://chaosfab.com/toyaccess.html

they are the first to the top
thanx guys
david

overpriced, IMO. $13 for the same kit from here:
http://www.suspension.com/toyotapickups.htm

 

[CMB1998]

well i kinda have an idea where to put these, but i need stepbystep instructions and i have searched info about them but nothing. any of you have any ideas or help??

http://chaosfab.com/toyaccess.html

they are the first to the top
thanx guys
david

I asked about these a while back and never got any difinitive answers if they were worth it. let me know what you think after you install them.

Chris

 

[Live4yotas]

I had new urathane rack and pinion bushings installed on my tacoma with new All Pro Offroad stainless braided brake lines the morning before my tacoma got totalled. The rack and pinion urethane kit was a pain to get on without dissconnecting one side of the rack but when did it without dissconnecting it. But I had to take the sway bar off.

 

[hytenor]

when you replace rack bushings make sure to torque the big nut to 141# and the others to 123#. Drive around for a day or so and retorque. drive another 500 miles and retorque again. you'll surprised how much they loosen up until everything get seated.

 

[Live4yotas]

I don't have to worry about driving mine around to test them. The truck is no long driveable.

 

[x0ffr0adtac0x]

thnx guys really appreciate it

 

[shadymilkman]

http://www.parksoffroad.com/tacomamods/kristacoma/rackbushings/rackbushings.htm

another write up

 

[CMB1998]

I had new urathane rack and pinion bushings installed on my tacoma with new All Pro Offroad stainless braided brake lines the morning before my tacoma got totalled. The rack and pinion urethane kit was a pain to get on without dissconnecting one side of the rack but when did it without dissconnecting it. But I had to take the sway bar off.

Did you notice any difference in the day you had them on?

Chris