TTORA Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
162 Posts
Discussion Starter · #1 ·
Hi y'all I am marshall from pa-ttora.

I will bring a complete tool set, wrenches and sockets.

I am gonna try and get a :welder: 220 welder, but we will need a 220 generator, so if nobody has a 220 gen, I won't waste time borrowing the :welder: welder. I may bring the torch set IF anybody thinks it will be useful, but it is mainly for cutting, not braising.

I know we will have a few co2 and air tanks floating around.

Post up so we can keep the fellow ttora guys running. Not that taco's break, but I have seen it :D !
 

·
Premium Member
Joined
·
1,898 Posts
A friend of mine has a portable (on a trailer) welding setup. A real big mutha, if need be, I'll just have him drag that out to us.
I need another spare CV...my spare got used, never replaced it.

And I'll bring enough deer kielbasi for everyone. This time I won't forget. :D

--Scott
 

·
Premium Member
Joined
·
4,997 Posts
Fishbone said:
A friend of mine has a portable (on a trailer) welding setup. A real big mutha, if need be, I'll just have him drag that out to us.
I need another spare CV...my spare got used, never replaced it.

And I'll bring enough deer kielbasi for everyone. This time I won't forget. :D

--Scott
You guys need one of these! You can run them on two batteries. It welds up to 1/2" steel.

Later,
....Mike

 

·
Premium Member
Joined
·
1,898 Posts
WOW. Where and how much?
 

·
Registered
Joined
·
162 Posts
Discussion Starter · #5 ·
Mike said:
You guys need one of these! You can run them on two batteries. It welds up to 1/2" steel.

Later,
....Mike

yeah, those puppies are nice, but they won't burn in and weld like a 220...

fish, get that trailer... that would be sweet.
 

·
Premium Member
Joined
·
4,997 Posts
Doc_Sausage said:
yeah, those puppies are nice, but they won't burn in and weld like a 220...

fish, get that trailer... that would be sweet.
Well, if you wanna hook together three car batteries, you can weld up to 3/4". Why would you wanna drag a trailer around when you could toss a briefcase in your rig? I've used mine a few times, and it welds up just about anything you would want to weld out on the trail with just two batteries.

Later,
....Mike
 

·
Premium Member
Joined
·
1,898 Posts
Mike said:
Central 4WD has them for $499, you could probably call Bobby at PORC and get it cheaper.

Later,
....Mike
Ouch. That's the cat's ass, though. Maybe someday....

--Scott
 

·
Registered
Joined
·
162 Posts
Discussion Starter · #9 ·
Mike said:
Well, if you wanna hook together three car batteries, you can weld up to 3/4". Why would you wanna drag a trailer around when you could toss a briefcase in your rig? I've used mine a few times, and it welds up just about anything you would want to weld out on the trail with just two batteries.

Later,
....Mike
3.4", on the trailside, fawk. Me want. I was thinking a big welder back at the camp after we limp it home to fix it for the next day. either way if somebody has one of those we are set, if not we are stuck with the welder cart.
 

·
Registered
Joined
·
153 Posts
Doc_Sausage said:
Hi y'all I am marshall from pa-ttora.

I will bring a complete tool set, wrenches and sockets.

I am gonna try and get a :welder: 220 welder, but we will need a 220 generator, so if nobody has a 220 gen, I won't waste time borrowing the :welder: welder. I may bring the torch set IF anybody thinks it will be useful, but it is mainly for cutting, not braising.

I know we will have a few co2 and air tanks floating around.

Post up so we can keep the fellow ttora guys running. Not that taco's break, but I have seen it :D !

Got the 220 generator and can bring that. It's 5550 watts, that should be enough. Check to see what 220 plug it uses. We may need to make an adaptor if it's not a standard 20A 3 prong 220V plug.

You can hit me offlist and I can give you my number.

I'm looking forward to this Takeover. I've been wanting to goto one for the past 4 years.....and now I can make it.
 

·
Registered
Joined
·
1,039 Posts
I always bring a full set of sockets, wrenches and stuff, I also carry an 18volt sawzall for working on fenders and exhaust pipes! On board air, recovery stuff, whatever I can stuff into my toolbox!!!
 

·
Premium Member
Joined
·
1,805 Posts
I can bring a 110v welder if anyone needs to do any parking lot welding.
 

·
Registered
Joined
·
162 Posts
Discussion Starter · #13 ·
78fj40 said:
Got the 220 generator and can bring that. It's 5550 watts, that should be enough. Check to see what 220 plug it uses. We may need to make an adaptor if it's not a standard 20A 3 prong 220V plug.

You can hit me offlist and I can give you my number.

I'm looking forward to this Takeover. I've been wanting to goto one for the past 4 years.....and now I can make it.
Hold that thought. I want to see what fishbone has for a welder...
 

·
Registered
Joined
·
162 Posts
Discussion Starter · #14 ·
joeylead said:
I always bring a full set of sockets, wrenches and stuff, I also carry an 18volt sawzall for working on fenders and exhaust pipes! On board air, recovery stuff, whatever I can stuff into my toolbox!!!
When making a rig, remember...
-What the saw-zall doesn't get, mother nature will.
 

·
Registered
Joined
·
162 Posts
Discussion Starter · #15 ·
CronusTRD said:
I can bring a 110v welder if anyone needs to do any parking lot welding.
I would think we could find a 110 outlet easily...
 

·
Registered
Joined
·
1,120 Posts
Mike said:
You guys need one of these! You can run them on two batteries. It welds up to 1/2" steel.

Later,
....Mike

Do you have to disconect the batteries or could you use a dual battery setup while it is still in the truck?
 

·
Registered
Joined
·
965 Posts
ill have extra birfs and knuckles in my tow rig. sawzall,cordless drill and bits in truck. full tool set possibly a welder by then. if we really need anything else i can just run home since im fairly close by(45minutes)
 

·
Registered
Joined
·
105 Posts
I can bring a 5500 Watt generator with a couple good heavy duty extension cords and 2 5 gallon water cans with water. Remember though that I've gotta leave Saturday evening. Work pays an extra 35% for Saturday into Sunday...

Anyyone going Thursday have extra sleeping room?

MikeS.
 

·
Registered
Joined
·
1,039 Posts
I can bring my gas powered air compressor to run air tools and fill tires. It is a twin tank, 12 hp 25 cfm wheelbarrow style compressor but I need some place to keep it during the day, like a trasler or something!
 
1 - 20 of 20 Posts
Top