TTORA Forum banner
1 - 17 of 17 Posts

· Registered
Joined
·
242 Posts
Discussion Starter · #1 ·
my 2003 tacoma didnt come with a tow package and i am looking to get one soon...i want one where it is hidden the most and i want a class III...where would be the cheapest place to find one? thanks for your help
 

· Registered
Joined
·
588 Posts
draw tite

I have a draw tite hitch on my 2003 taco. It tucked up behind the bumper and then drops down to place the receiver directly under the bumper. I bought my truck used and discovered this after so i don't know the model number or anything, but it looks factory.
 

· Registered
Joined
·
3,249 Posts
My Stealership kept on leaving me automated voice mails about class III hitches for 78 CDN (65 USD) on close out. That's a lot cheaper than Reese, et al, but shipping could be a bitch.
 

· Premium Member
Joined
·
1,065 Posts
Where are ya at? I just got my demello rear bumper and removed my hidden hitch...I will sell it cheap, but no wiring harness or anything, just the bolt on hitch...its easy to put on , just mounts the the stock bumper mount spots..
 

· Registered
Joined
·
1,391 Posts
toubabokoomi said:
my 2003 tacoma didnt come with a tow package and i am looking to get one soon...i want one where it is hidden the most and i want a class III...where would be the cheapest place to find one? thanks for your help
U-Haul sometimes has good out the door specials on hitch set-ups, under $100. Also try small independent shops around your area, sometimes they have stock they just want to get rid of. Dont have them install, thats what puts the price high and Tacoma hitches are easy to install.

Tim
 

· Registered
Joined
·
142 Posts
Where are you located? I have one to sell. Its a U-haul round tube and the only thing that is visiable is the part the drops down for the reciever. The factory ones from Toyota are square tube and you can see the ends where is attaches to the frame.
 

· Registered
Joined
·
1,391 Posts
You could go to a salvage yard, usually they overcharge for parts like that. The Toyota recevier hitch only uses 6 bolts to hold on (2 each side bottom of the frame, and 2 in the bottom of the bumper or farther back on the frame) you might have to remove the spare to get at it.

Tim
 

· Registered
Joined
·
3,249 Posts
M3Man02 said:
I would check out

http://trdparts4u.com/

They sell actual Toyota hitches for $263. With the wiring harness, hell of a deal if you ask me
As much as I like Chris, and try to be as much of a pimp as I can for him, that's not* a good deal (*for Toy stuff yes, but compared to other options, no).

A plug and play tail light harness, and bracket hitch is tons cheaper. The Toy harness is just waaaay too much cash.
 

· Registered
Joined
·
199 Posts
What's the difference between a Class II and Class III hitch?? I just bought a 2004 DC with a factory trailer hitch (Code: DH Class II). It has a 2" receiver though. I thought Class II's only had the small receiver. Could some one help me out a little bit.
 

· Registered
Joined
·
69 Posts
mudferret said:
As much as I like Chris, and try to be as much of a pimp as I can for him, that's not* a good deal (*for Toy stuff yes, but compared to other options, no).

A plug and play tail light harness, and bracket hitch is tons cheaper. The Toy harness is just waaaay too much cash.
I don't have any experience with Toyota Hitches, but I do know that I had a Uhaul hitch and it was Crap! It rusted after about 3 years use. The toyota one might do the same, but I am willing to give it a shot for a few more dollars.
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top