TTORA Forum banner

Who is running a coilover jacked up around 3" w/manual hubs?

1791 Views 12 Replies 6 Participants Last post by  KStacoma
I've been having some problems with my 98 taco, it's got manual hubs and lifted on fabtech coilovers probably to about 2.75-3" w/a 1" diff drop and am getting some helatious noises from the front end, i've isolated it to the hub/c.v. area on drivers side and am just wondering if anyone sorta "in my situation" lift wise has had any similar problems. Also what would a messed up c.v. sound like?
1 - 1 of 13 Posts
Ive got coilovers at around 3" w/ manual hubs, I get no noises like that from the front end.

I usually notice a messed up CV boot by hearing clicking while turning. What do your angles look like (fins touching?), and what kind of shape are the boots in?
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.